Takt Timer FAQs
Question: How do I change my Model 6300 display to be a Takt Timer?
- Step 1. With your wireless remote, press "menu" , "215" , and "enter".
- Step 2. To set the Takt timer interval, press "menu" , "13" , "enter" , now enter the interval time (HH:MM:SS), and then "enter".
- Step 3. Press "down" to start the timer. If timer is started properly, the red blinking power light in the bottom right-hand corner of the display will begin blinking faster.
Question: Can I change my 6300 Takt timer to use minute intervals?
- Step 1. With your wireless remote, press "menu" , "212" , and "enter".
- Step 2. Press "menu" , "231" , and "enter".
- Step 3. Press "menu" , "242" , and "enter".
- Step 4. To set the Takt timer interval, press "menu" , "13" , "enter" , now enter the interval time, and then "enter".
- Step 5. Press "menu" , "215" , and "enter".
- Step 6. Press "menu" , "233" , and "enter".
- Step 7. Press "down". This will start the timer. If timer is started properly, the red blinking power light in the bottom right-hand corner of the display will begin blinking faster.
Question: Can I change my 6300 Takt timer to use second intervals?
- Step 1. With your wireless remote, press "menu" , "212" , and "enter".
- Step 2. Press "menu" , "231" , and "enter".
- Step 3. Press "menu" , "241" , and "enter".
- Step 4. To set the Takt timer interval, press "menu" , "13" , "enter" , now enter the interval time, and then "enter".
- Step 5. Press "menu" , "215" , and "enter".
- Step 6. Press "menu" , "233" , and "enter".
- Step 7. Press "down". This will start the timer. If timer is started properly, the red blinking power light in the bottom right-hand corner of the display will begin blinking faster.
Question: Can I change my 6300 Takt timer to use hundredths of a second intervals?
- Step 1. With your wireless remote, press "menu" , "212" , and "enter".
- Step 2. Press "menu" , "231" , and "enter".
- Step 3. Press "menu" , "240" , and "enter".
- Step 4. To set the Takt timer interval, press "menu" , "13" , "enter" , now enter the interval time, and then "enter".
- Step 5. Press "menu" , "215" , and "enter".
- Step 6. Press "menu" , "233" , and "enter".
- Step 7. Press "down". This will start the timer. If timer is started properly, the red blinking power light in the bottom right-hand corner of the display will begin blinking faster.